Відео

Great video, can you show how you zero the bit for this project? thanks. I have never zeroed a V bit yet. thanks

Triangles are three sided - these are rectangles

Use the material test to test! Don't waste time with doing random speeds and %.

To change from straight to curved lines, its easier to (in edit nodes mode) grab the lines and drag them to the shape, they'll turn into curves and the point you grabbed will move with your mouse. That way you can turn only one side smooth as well.

thank you!! Helped alot!

How are you getting that with that high of speed and lower power?

Which did you go with?

I would go with Longmill if I had a budget of under $2000. Onefinity if it's $3000.

Stupid!

Great idea

What ratio would you recommend for a minions 4 ultimate 6x AAA fart gun? It is a vegetable glycerin fluid.

Only works on the popup heads. Not wide enough for the rotary heads. I had to cut some off to get around. Finally broke last year.

works in theory but a shields always break

my honda gets 18.5 MPG 😂

on my 2016 sport, I donot have the button, I need to use instrumental cluster. The reset option is in the "vehicle settings". I donot know how I found it.

I'm back in 2024 to learn this once again lol

Thank you sooooo much 💕💕💕

Awesome cheers, can we see something you've set this into?.

Great video, I do have a question. I have the atomstack a5m50. I want to do a test like this but on thinner wood, do I need to do more than one pass? I am having issues with settings.

Smart!

Your video is very informative. Thank you for sharing. I have actual crystal prisms, your creation won’t work for them. Do you have suggestions how I could crush them. I’d like them the size of your amethyst before u crushed them. Any suggestions would be most helpful. Thank you.

Question, does the water have to be distilled or can i use regular tap water?

You still making shields ?

Sounds like you were gonna buy the Onefinity at about the three minute mark. Not sure if you are going to do small market or hobby stuff - but I am not sure this was an apples to apples comparison. Good to point out how different they are though. At this range, I would think the accountant in me would look at that price difference prreeettty hard. Thanks

profile cut on the line to the depth you want with 90 deg bit does the same thing

I think the traced line should be traced along the middle of the path to have a more precise line of the drawing, I don't understand why you draw it along one of the sides of the shapes... if you do it like that, then you could just delete the outer line, or the inner line, and complete the pieces missing in the line you are left with... you wouldn't need so much work. But I thank you for this tutorial because I didn't know how you could draw with vector lines in Lightburn, I thought you always had to import them from any other program.

Thanks

thanks for the ideas! headed to the store for some nipples. i am thinking to turn the caps on the lathe to make the crushing area flat. also i will probably adjust the threads to where i can use them as a depth stop hopefully improving efficiency

Would a pestle and mortar work?

An easier way to smooth your lines is , once you make your straight line shape, select it, use the offset tool to offset out a fairly large amount, deleting the original shape, and then shrink it back to the correct size.

I've watched several Text on Text videos and Your's finally got me making the perfect sign !! Thanks ! Your help on Litchenberg has been great too !!

how about settings for 20w

i have an older version of the software. 9.5. How would i be able to do a chamfered edge without the toolpath option ?

That worked on my 2007 Honda Fit 2007.

Thank you so much for posting this video. I made this stone crusher and crunched up a bunch of raw garnets. It worked perfectly. My initial plan was to crush them with a hammer in a box to keep the fragments from flying. This is idea is sooooo much better. Thanks again.

is the wood green when you make the bowls?

Yeah, theyre hard to find for a very good reason!!!!!!

I have been watching your videos for years and I have you to thank for inspiring me to build my own lichtenberg device. Thank you sir and keep your head up.

I'm guessing you could fill that smaller pipe with sand to help give it some more weight also. I'm definitely building this, thanks for the info!

Can you do a tutorial for the template and how you made it? I’m new to light burn. Shield looks awesome

And after you cut & sand it down what do you do to the leather to make it like nice soft, shiny to where you can’t tell it was cut. Thank you for video as well bro 🙏🏽

Thanks... just what I needed.

Cool! So, the back of your leather project is oriented so it's always on the left, correct?

Great idea! And it worked pretty slick!!! Good for you. Thanks for sharing.

Thanku so much sirr for this info❤️❤️🙂

Does it work with fresh cream?

i thot i wonted this one till i see you doing the lid. butt i steel like it would hold more. from what i see i think the 5 would not event fill all the way befor some gos to the vac.

Caption on longmill is misleading, it says you are testing mk2 but all your pictures are the mk1. The mk2 has different extrusions which are much stiffer, have a lot less flex than the onefinity. I actually saw a video where a person stood on the mk2 and it moved no problem without flexing.

Can I shorten a strand that only 2 wire?

😂 thank you so much! I didn’t know before this video.